When using the smart rack, what are the tips for use? Let the editor of the inverted smart rack manufacturer take you to understand it together.
1. Installation and disassembly skills
Correct installation:
When installing the smart rack, make sure that all parts are installed in place, especially key parts such as pull rods and guardrails, to prevent the goods from falling off or collapsing.
Install according to the product manual or the guidance of professionals to ensure that the structure is stable, safe and reliable.
Convenient disassembly:
When it is necessary to disassemble the smart rack, it should be done in the correct order, first remove the pull rods and guardrails, and then gradually disassemble the main structure.
Be careful and gentle during disassembly to avoid damaging parts or causing personal injury.
2. Cargo stacking skills
Reasonable stacking:
The stacking height generally does not exceed the design upper limit of the smart rack, usually not more than 5 layers, to ensure the stability of the structure.
Adjacent smart racks need to be fixed to form a fixed whole to improve the stability of the stacking group.
Heavy objects on the bottom layer:
Follow the principle of "heavy bottom and light top", place heavy objects on the bottom layer and light objects on the upper layer to prevent collapse caused by unstable center.
Cargo specifications:
Make sure that the size of the cargo does not exceed the specifications of the rack, and the size of the pallet and cargo should be less than 100mm of the size inside the shelf to leave a safe gap.
III. Usage and maintenance tips
Moisture and rust prevention:
Pay attention to moisture prevention to avoid rust on the shelves, especially the interface position, which should be wiped frequently to keep dry.
Avoid overloading:
Each rack has its carrying capacity, and overloading should be avoided to prevent structural damage or collapse.
Choose pallets correctly:
Use pallets of qualified quality and avoid using non-standard or substandard pallets.
Prevent impact:
When carrying goods, be careful and gentle to avoid impacting the rack to prevent structural deformation or damage.
Regular inspection:
Regularly check whether the structure and components of the rack are intact. If damaged, repair or replace them in time.
Safe operation:
When storing goods on the rack, personnel are not allowed to enter the bottom of the rack to avoid danger.
4. Layout and planning skills
Flexible layout:
According to the actual situation and storage needs of the warehouse, flexibly plan the layout of the rack to improve space utilization and access efficiency.
Classified storage:
Classify and store goods according to their types, specifications and quantities for easy management and retrieval.
Aisle setting:
Reasonably set the aisle width to ensure that forklifts and other loading and unloading equipment can pass and operate smoothly.
